2019 New Holland Construction Compact Track Loaders C232

Selling Price -

$36,500.00

Information

2019 New Holland C232 Track Loader
74hp 4 Cylinder Diesel
9600lb machine
Hand controls
2 Speed Drive
Standard flow Auxilary Hydraulics
Super boom Vertical lift
84" Bucket w/ Bolt on edge
Local one owner trade w/ 549 hours
Fresh service just done by our shop
$36,500

Photos

Highlights

  • $36,500.00
  • Newton, North Carolina
  • Pre-Owned
  • 19724
  • 2019
  • New Holland Construction
  • Compact Track Loaders C232
  • Pre-spin on 30 microns | Main-spin on 4 microns | Air intake: Turbocharged Aftercooled with external EGR
  • 74
  • 549
  • Diesel
  • Available
  • Bucket hinge pin: 131.1 in (3330 mm) | Dump Reach Max.: 34.4 in (875 mm) @ 45°

Specifications

  • 2019
  • New Holland Construction
  • Compact Track Loaders
  • C232
  • Compact
  • Pre-spin on 30 microns | Main-spin on 4 microns | Air intake: Turbocharged Aftercooled with external EGR
  • FPT | Model: F5H FL463A F001
  • Diesel 4-stroke, Turbo, D.I.
  • 4
  • 3.9 in (99 mm)
  • 4.3 in (110 mm)
  • 207 in3 (3.4 L)
  • HPCR Direct
  • 2 diesel
  • Liquid
  • High idle - no load: 2500 +/- 25 rpm | Rated - full load: 2500 rpm | Low idle: 1150 +/-25 rpm
  • per SAE J1349 Gross: 74 hp (55 kW) @ 2500 rpm | per SAE J1349 Net: 68 hp (51 kW) @ 2500 rpm
  • per SAE J1349 Peak: 232 lb-ft (314 Nm) @ 1400 rpm
  • Type: Spring applied, hydraulic release disc
  • Lift cylinder: 4840 lbs (21.5 kN) Tip Limit | Bucket cylinder: 7360 lbs (32.7 kN) | Cycle time Raise: 3.9 sec | Cycle time Lower: 2.5 sec | Cycle time Dump: 2.7 sec | Cycle time Roll back: 2.0 sec
  • Low range: 5.1 mph (8.2 km/h)
  • Gear
  • Drive pump electro hydraulic: 24.2 gpm (91.5 Lpm) | Pump: 24.2 gpm (91.5 Lpm)
  • Relief: 3046 psi (210 bar)
  • Angle of departure: 32° | Dump angle: 55°
  • Bucket hinge pin: 131.1 in (3330 mm) | Dump Reach Max.: 34.4 in (875 mm) @ 45°
  • 9.5 in (243 mm)
  • 76 in (1930 mm)
  • 25.5 gal (96.5 L)
  • 8.9 qt (8.5 L)
  • System with filter: 47 qt (44.5 L)
  • Rated operating load 50% tip: 3200 lbs (1451 kg) | Rated operating load 35% tip: 2240 lbs (1018 kg) | Tipping load: 6400 lbs (2902 kg)
  • 9630 lbs (4370 kg)
  • 9300 lbs (4220 kg)