Back

2018 Case CE SV280

MoreLess
Limited Time Offer!

Selling Price -$29,500.00
No Images Available

Selling Price -

$29,500.00

HD Certified Pre-Owned
2018 Case SV280 Skid Steer Loader
74hp 4 Cylinder Turbo Diesel
Hand Controls (ISO or H pattern)
2 Speed Drive
8000lb unit
5600lb tipping load
New Tires & Fresh Service
New 72" Smooth Bucket w/ Bolt on Reversible edge
Local one owner trade
1473 hours
$29,500
  • 2018
  • Case CE
  • SV280
  • Base
  • General
  • ISM N844LTA-DI-F-45
  • Tier 4 Final
  • @ 2800 RPM – SAE J1349: Gross - 74 hp (55 kW), Net - 68 hp (51 kW)
  • Peak @ 1400 RPM: 232 lb·ft (314 N·m)
  • High idle – no load: 2500 +/- 25 rpm | Rated – full load: 2500 Rpm | Low idle: 1150 +/- 25 rpm
  • #: 4
  • 207 in3 (3.4 L)
  • 3.9 in (99 mm)
  • 4.3 in (110 mm)
  • Type: Direct drive countershaft Powershift w/ electronic shift control and inching pedal
  • Travel: Low range - 7.0 mph (11.3 kph)
  • Water | Implement: Gear
  • Water pump: 29 gpm (110 L/min) | Drivetrain: @ rated engine RPM: @ 97% efficiency - 29.4 gpm (111 L/min) | Standard @ rated engine RPM: @ 100% efficiency - 20.6 gpm (78.0 L/min)
  • Charge: 360 psi (24.5 bar) | System relief: 5,220 psi (360 bar)
  • Maximum dump angle: 53.5° | Angle of departure: 23.5° | Clearance circle rear: 70.4 in (1.79 m)
  • Operating: with foundry/excavating bucket - 160.4 in (4.07 m), with low profile bucket - 164.4 in (4.18 m), with low profile extended bucket - 169.5 in (3.04 m)
  • Bucket hinge pin: 130.0 in (3.30 m) | Top of ROPS: 78.8 in (2.00 m) | Bottom of level bucket, fully raised: 119.6 in (3.04 m) | Dump: with foundry/excavating bucket - 93.7 in (2.38 m) @ 45°, with low profile bucket - 90.7 in (2.31 m) @ 45°
  • without attachment with coupler: 117.7 in (2.99 m) | F. with foundry/excavating bucket on ground: 141.9 in (3.60 m) | with low profile bucket: 146.0 in (3.71 m) | with low profile extended bucket: 146.0 in (3.71 m)
  • Over the tire spec tires: 64.0 in (1.63 m)
  • bottom of belly pan: 8.0 in (0.20 m)
  • 52.0 in (1.32 m)
  • Voltage: 24 Volts, negative ground | Starter: 4.29 hp (3.2 kW)
  • 160 amp
  • 12-volt low-maintenance 1,000 cold-cranking amps @ 0° F (-18° C°)
  • Spring-applied, hydraulic release multiple disc.
  • 25.5 gal (96.5 L)
  • Engine w/ filter: 8.9 qt (8.5 L)
  • Hydraulic system: Total - 11.99 gal (45.46 L), Reservoir - 6.0 gal (22.7 L)
  • Unit equipped w/ open cab; 165 lb operator; 72 in Low Profile bucket; full of fuel; 12 x 16.5 tires: 8,090 lb (3 670 kg) | Shipping: 7,665 lb (3 475 kg)
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $29,500.00
  • Newton, North Carolina
  • Pre-Owned
  • 19858
  • 2018
  • Case CE
  • SV280
  • ISM N844LTA-DI-F-45
  • 74
  • 1471
  • Diesel
  • Available
  • Over the tire spec tires: 64.0 in (1.63 m)
  • Bucket hinge pin: 130.0 in (3.30 m) | Top of ROPS: 78.8 in (2.00 m) | Bottom of level bucket, fully raised: 119.6 in (3.04 m) | Dump: with foundry/excavating bucket - 93.7 in (2.38 m) @ 45°, with low profile bucket - 90.7 in (2.31 m) @ 45°

Recommendations

Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.